MerCruiser Lower Carrier Retainer Wrenches
Pre-Alpha, Alpha, Gen II, TRS,
Bravo 1
This
is MerCruiser p/n 91- 61069T lower bearing carrier wrench. It will fit the 4 3/8"
retainer nut in the lower housing on all #1 MerCruiser drives made from 1966 to
Date including Pre-Alpha, Alpha One, Generation II, Bravo I and
TRS.
This
will also fit Mercury/Marnier outboards 150hp & up.
This
item now comes from GLM Marine with a black oxide finish.
Shipping
Wt. 4 1/2 Lbs.
Click
here for nuts.
Note
! This tool will not fit
Bravo 2, 3, XR or TR.
: Order # 0190
TR, Bravo 2 & 3
This tool
replaces MerCruiser p/n 91-17257 & 91- 805374--1 lower bearing carrier
wrenches. It will fit the larger nut in the lower housing on TR, Bravo 2 & 3 sterndrives
Note ! This
tool will not fit Bravo XR Lower Units because the XR nut is about 1/2 smaller
in diameter.
This item
comes from GLM Marine.
Shipping
Wt. 3 1/2 Lbs.
Click
here for nuts.
: Order # 0490
Bravo XR
This is
MerCruiser p/n 91- 840393 lower bearing carrier wrench. It will fit the larger nut in the lower housing on all
Bravo XR sterndrives
This item
comes from MerCruiser.
Shipping
Wt. 4 1/2 Lbs.
Click
here for nuts.
: Order # 0393
Mercury Outboard
Motors
This is
Quicksilver p/n 91- 73688 lower bearing carrier wrench. It will fit the 4 inch
outside diameter nut in the lower housing on some Mariner & Mercury
outboards.
Fits
Mariner :
* 75/80/85
( 4 Cyl. )
* 90/115/140
( In Line 6 Cyl. )
* V-6/150
Magnum II
Fits
Mercury :
* 75/80
( 4 Cyl. )
* 90/115
( In Line 6 Cyl. )
* V-6/XR4
The nut
this tool fits is exactly 4 inches on the outside diameter.
Shipping
Wt. 4 Lbs. This item
comes from Quicksilver.
Click
here for additional applications for this tool
Click
here for nuts.
: Order # 3688
Please
Note ! We are a MerCruiser Sterndrive web site. For Mercury & Mariner
outboard lower carrier wrenches other than the one shown above, please call
Sherwood Taylor @ (906) 466-2180
Click
Here For Prices
MerCstuff,
llc 
